REELS
- SALTWATER SPINNING
- SPINNING
- GAME
- BAITRUNNER
- BEACH / ROCK
- BAITCAST
- OVERHEAD
- ELECTRIC
RODS
LINE
LURES
- SQUID JIGS
- STICKBAITS
- POPPERS
- HARDBODY
- JIGS
- SOFT PLASTIC
ACCESSORIES
- BAGS
- ROD TUBES
- NETS
- TOOLS
- REEL COVERS
- ACCESSORIES
CLOTHING
WHAT'S NEW
- REELS
- RODS
- LIFESTYLE GEAR
- CATALOGUE
- STELLA SWC
SERVICE
ARTICLES

Tranx A

The Tranx incorporates Shimano’s CoreProtect concept that maintains a smooth and free feel while winding. It is ideally suited to both fresh and salt, ranging from light jigging, soft plastic use or casting hard body lures. Tranx reels not only fit beautifully in the hand, they are packed with more than enough drag capacity and saltwater durability, the Tranx is at the next level.

Manual

Features

10 YEAR WARRANTY
SALTWATER READY
HAGANE BODY
X-SHIP
CROSS CARBON DRAG
SHIELDED ANTI-RUST BEARINGS
HIGH CAST RATING
STAR DRAG

Product Videos

Watch

Product Technologies

Hagane Body The HAGANE Body is produced from highrigidity aluminium or magnesium. This creates stiffness and impact resistance, while at the same time eliminating flexing of the body. The result is a rocksolid housing and support for the moving internal gearing and greater efficiency throughout the reel.	CoreProtect CoreProtect prevents water entering the body, from under the rotor at the front of the body, and also into the Roller Bearing unit.	S ARB Shimano S ARB bearings are high corrosion resistant ARB ball bearings with an extra shield for improved protection against sand, salt or dust.	Super Free Spool The Super Free bearing supported pinion gear system (SF) was designed to eliminate friction on the spool shaft during the cast. In standard baitcasting reels, when the clutch bar is pressed down, the pinion gear is freed and can actually drag on the spool shaft, creating friction and limiting the length of the cast. With SF, the pinion gear is supported by a ball bearing, and when the clutch is disengaged the pinion gear and spool shaft are kept in precise alignment. The result is zero friction on the spool shaft for increased freespool.	VBS VBS uses centrifugal force rather than magnets to aid controlling the cast. The individual brake weights, when turned on, are forced outward at the beginning of the cast when backlashes most often occur, causing friction that reduces the speed of the spool. Once the spool speed begins to slow, the pressure lessens, allowing the spool to continue spinning. The result is a much more consistent spool speed that is easier to manage and takes advantage of the reel’s maximum casting distance.
XShip XShip is a combination of features that work together to create much greater efficiency. By positioning the pinion gear close to the centre line of the large diameter drive gear, more power is transferred from the handle to the rotor. The pinion gear is also supported by two Shimano ARB roller bearings. This creates more stability.	S3D spool Shimano's S3D technology leads to significantly reduced spool vibration. By designing a balanced and uninform thin wall aluminium constructed spool, S3D creates an incredibily smooth feeling when casting and retrieving lures.	Cross Carbon Drag This carbon drag material provides a wider range of drag settings, along with the smoothest Shimano drag performance ever.

Product Specifications

Series

Tranx

Warranty

10 Year

Bearings

5+1

Family Type

Baitcaster

Models

7

Filter by:

Item code	Description	Bearings	Max Drag (kg)	Gear Ratio	Retrieve Per Crank (cm)	Mono Capacity (kg/m)	PowerPro Braid (lb/yds)	Weight (g)	RRP
Item code	Description	Bearings	Max Drag (kg)	Gear Ratio	Retrieve Per Crank (cm)	Mono Capacity (kg/m)	PowerPro Braid (lb/yds)	Weight (g)	RRP
Item code TRX200A	Description TRANX 200	Bearings 3+1	Max Drag (kg) 5.5	Gear Ratio 6.2:1	Retrieve Per Crank (cm) 66	Mono Capacity (kg/m) 5/142	PowerPro Braid (lb/yds) 30/190	Weight (g) 220	RRP $329.00
Item code TRX200AHG	Description TRANX 200HG	Bearings 3+1	Max Drag (kg) 5.5	Gear Ratio 7.2:1	Retrieve Per Crank (cm) 77	Mono Capacity (kg/m) 5/142	PowerPro Braid (lb/yds) 30/190	Weight (g) 220	RRP $329.00
Item code TRX300A	Description TRANX 300	Bearings 5+1	Max Drag (kg) 10	Gear Ratio 5.8:1	Retrieve Per Crank (cm) 75	Mono Capacity (kg/m) 9/160	PowerPro Braid (lb/yds) 50/190	Weight (g) 330	RRP $449.00
Item code TRX300AHG	Description TRANX 300 HG	Bearings 5+1	Max Drag (kg) 8	Gear Ratio 7.6:1	Retrieve Per Crank (cm) 100	Mono Capacity (kg/m) 9/160	PowerPro Braid (lb/yds) 50/190	Weight (g) 330	RRP $449.00
Item code TRX301A	Description TRANX 301 LEFT HAND	Bearings 5+1	Max Drag (kg) 10	Gear Ratio 5.8:1	Retrieve Per Crank (cm) 75	Mono Capacity (kg/m) 9/160	PowerPro Braid (lb/yds) 50/190	Weight (g) 330	RRP $449.00
Item code TRX400AHG	Description TRANX 400 HG	Bearings 5+1	Max Drag (kg) 8	Gear Ratio 7.6:1	Retrieve Per Crank (cm) 100	Mono Capacity (kg/m) 9/235	PowerPro Braid (lb/yds) 50/275	Weight (g) 340	RRP $449.00